Flexfoil CAD-CUT Premium Plus by STAHLS - A4 sheet
THIN AND ELASTIC Flexfoil WITH SOFT HAPTIC AND SILKY FINISH.
Polyurethane (PU) Flexfoil, which is characterized by high coverage and a matte surface finish. Soft to the touch, therefore perfect for large motifs. Slightly adhesive backing. Easy cutting and weeding. Suitable for multi-colored prints.
This Flexfoil is suitable for:
- 100% cotton
- 100% polyester *
- 100% nylon *
- Polyester-cotton blend
- Spandex blended fabric
- Polyester Mesh
* Must be tested before printing!
Please always test the cut settings before production. Please remember that the settings depend on the age of the blade used. In order to ensure optimal processing of the material, please only plot logos with a minimum line thickness of 2 mm.
- Temperature: 130 ° C / 150 ° C
- Time: 10 sec. / 5 sec.
- Pressure: Medium
- (# 4-6 at Hotronix®)
- Backing: removeable while hot
First plot the background for 3-5 seconds, then remove the backing with cold water. Repeat the process for each additional color. Plot the last color for 18-20 seconds. Remove the straps cold.
Care instructions and storage
Washable up to 60 ° C. Please do not use fabric softeners or bleach. Can be ironed over directly. Always store foils in a cool, dry environment. Avoid direct heat or sunlight.